Your pickleball paddle, in addition to the basic pickleball, is the most crucial piece of equipment you’ll require. Therefore, keeping your paddle in good shape will guarantee that you play in and win plenty more pickleball tournaments in the coming future. Consequently, the Pickleball paddle grip wrap is never merely a typical issue. Also, read the What to wear for Pickleball?
In my experience, regripping your pickleball paddle grip is a common and usual exercise you will conduct daily over your pickleball career. To have the most of your paddle, it’s necessary to ensure that the grip is clean, of the best quality, and grippy. However, the first question you might ask when you hear the word “regripping” is, how to change your pickleball grip?
Regripping :
Regripping will require a few essentials, including Razor-sharp scissors, Grip tape, an original grip, and an overgrip. It’s essential to recognize whether you have an overgrip or replacement grip. Replacement grips are typically preferred for a thinner grip experience. A thinner overgrip is placed on top of the regrip. Also, read Where Did Pickleball Originate?
You’re in the perfect destination if you’ve been thinking about changing your grip. In this article, we’ll go through each method for regripping your pickleball paddle one at a time.
Tip: Onix Graphite Z5 is one of the best pickleball paddle at the moment.
So, let’s begin:
How to Regrip your Pickleball Paddle:
Although regripping your pickleball paddles can appear challenging, once you try it, you’ll become an expert in no time! I’ll advise you to purchase two regrips rather than just a single before your start, just in case. You may simply remove it and start most of the time again, so it’s okay to make a blunder. Still, it’s helpful to keep a backup on standby. In the following steps, we’ll explain how to change your pickle paddle grip. So, let’s dig in:
-
Step 1: Prepare your workplace.
It is always a good practice to prepare everything before you start regripping your pickleball paddle. Let’s begin and gain a clearer idea of the topic since there are a couple of items you should be aware of while beginning. Here are a few items you will need at first:
- Razor-sharp scissors, if the paddle grip requires trimming. Kitchen scissors can be very useful.
- Either the original grip or an overgrip.
- Grip tape.
- If you are replacing the Original equipment grip, you may require to use pliers or a narrow screwdriver to extract the old staples.
Regardless of the kind of grip you select, it almost certainly includes a half-inch electric tape strip with a brand logo. After you have all the materials above, unwind the grip and proceed to this basic six-step procedure.
-
Step 2: Take off the prior Grip:
Start by removing the half-inch piece of adhesive tape from the handle’s underside. Take the grip off first, then the handle altogether. There can be some remaining grime or adhesive substance on the handle.
-
Step 3: Begin the wrapping:
Pull the grip out of its packing, then remove its plastic exterior and interior. Attach the tapering portion of the grip first, barely overlapping the handle’s bottom. The grip would be held in place by the tape-like stickiness on the backside. The secret to placing grip tape effectively is ensuring proper alignment while retaining rigidity. Start looping the paddle, gently overlapping the grip each time.
-
Step 4: Removing the leftover grip:
If there is any residual grip, work your way down, starting at the top and cutting it away at a 45-degree inclination to ensure the grip will fit appropriately in the open area. This can be done with some well-crafted kitchen shears or scissors. Whenever cutting, remember to leave yourself enough area to move.
-
Step 5: Tapping it off:
Finally, take finishing tape to regrip your pickleball paddle. You can utilize any of the Grip tape or the electrical tape. To attach the grip to the handle, wind the tape all around the gripping so that 1/2 of it is on the paddle and the other half is on the grip. It will be simpler to complete and maintain the grip in the perfect place if you loop the adhesive tape in the similar orientation that you’ve been covering your grip. Excellent, your paddle has been entirely regripped!
How to overgrip:
Over-gripping is also an excellent alternative if modifying your grip is not your concern, but you want additional tackiness or thickness. A pickleball paddle’s overgrip is a smooth, cushioned piece of tape that goes across the grip. As the name suggests, an overgrip is directly added to the grip you currently have. It can also extend your grip’s circle, add extra padding for convenience, and add additional vibration-dampening substance. Overgrips are affordable and available in a variety of hues and styles. Also, read the Indoor vs. Outdoor Pickleballs.
Putting an overgrip to the paddles is similar to completely regripping your pickleball paddle. Overgrips are uncommon because the strip’s end has just one strand of adhesion there. They are likewise placed starting at the lower part of the paddle and moving up towards the paddle’s throat or neck. Based on how you want the experience, you can loop the grip as tightly or loosely as you desire.
-
Getting started
You can start by unwinding pickleball overgrip tape and discarding the adhesive tape to get going. Regular grip tape is not nearly as elastic as overgrip tape. Taking this into account, you will require to stretch the tape considerably more tightly than you might with a standard regripping process. Also, check the What is an Erne in pickleball?
You must ascend the paddle like the step-by-step process: gradually and tightly. Once you have finished pickleball handle wrapping, check to see that the finishing tape has touched both the paddle and the grip. Cleanly enclose the grip, and you’re done.
-
Tips for wrapping pickleball grip
We have proposed a few tips and methods to offer the Pickleball paddle grip wrap over the years. The fundamental technique for regripping the pickleball paddle has previously been covered. Let’s go over some advice you need to be aware of before starting to group your pickleball paddle. These are what we felt the need to share with everyone beneath.
- Don’t take off the covering entirely in one go. The back maintains the grip’s stability and holds the stickiness in position until necessary.
- Whenever applying, avoid pulling too forcefully. Pickleball grips can sit appropriately on paddles with minimal to no pressure.
- Maintain the tightest grasp conceivable by keeping your hands as close as possible to the paddle.
- Whichever approach you use, make sure you overlap around the paddle’s handle the first time and wrap the bottom point. This will retain it and prevent it from accidentally coming off while being used.
- We are aware that not every paddle is the same shape. Make sure you get any scissors available, for instance, if you want to cut several of the additional grips.
Conclusion:
In short, it’s not tricky to regrip your pickleball paddle, as you’ve seen in this article. Not to forget that it will require time and patience to become used to regripping! You only need a pickleball paddle and basic supplies like grip tape and scissors. Also, check the How To Clean a Pickleball Paddle.
Which grips did you use? Do you have regripping suggestions? Pick from the different alternatives, and don’t stop playing pickleball.
Frequently Asked Questions:
-
When Should You Re-Grip Your Paddle?
For the optimum pickleball performance, swap out your pickleball paddle’s grip tape following 12 hours of gameplay or when it starts to feel slick rather than sticky. A more outstanding grip is provided by additional grip tape, which also keeps the handle clean and moisture-proof.
-
Who are the Top manufacturers of grips and overgrips?
Gamma is the top grip maker in the pickleball community. They offer a vast selection of grips. These grips are incredibly well-made, sticky, long-lasting, and available in various shapes and shades. ProLite is the runner-up to Gamma.
